Shear resistance of joints
Shear resistance shows the ability of a joint to withstand in-plane stresses during use.
Resistance to tearing
The test measures the force required to tear a membrane pierced by a nail shank by a force applied to the membrane at right angles to the shank axis.
Peel adhesion
The goal of the test is to determine the peel adhesion of self-adhesive tape from stainless steel at an angle 180° and 90°. Peel adhesion shows the bond…
Tensile strength and modulus of elasticity
The purpose of the proposed testing procedure is to determine tensile strength and tensile modulus of elasticity of materials and their connections. The…
Breaking strength and elongation at break
The breaking strength or the breaking force and elongation at break shows the ability of a material to withstand stresses during application and use.
Freeze-thaw resistance
Freeze-thaw test is to determine the durability of the product to cyclic freezing and thawing. The assessment influence of aging by cyclic freeze - thawing is…
Dynamic test
The goal of the test is to determine dynamic characteristics of a façade system in out-of-plane direction and their changes under long lasting vibrations with…
Sunlight XE resistance
Xenon test is to determine the durability of the product performed by aging test caused by full-spectrum sunlight and rain.
UV resistance
UV radiation test is to determine the durability of the product performed by aging test chamber with UV fluorescent lamps.
Temperature & humidity resistance
The purpose of keeping the samples in a climatic chamber (T+H) is to determine the effect that a given temperature and humidity have on the material at a given…