Thermal conductivity
Thermal conductivity of a material is a basic feature of thermal insulation. The test is conducted using the FOX 314 Lasercomp Inc. device, with a…
Linear thermal transmittance
The determination of the internal surface temperature in terms of critical surface humidity is determined using calculation (simulation) software in…
Airborne and impact sound insulation measured for prepared solution
The airborne and impact sound insulation is to determine of capability of noise protection against airborne and impact noises performed by mobile testing…
Critical damping ratio
The critical damping ratio measurement is to determine of ability to dissipate the energy of free vibrations in the tested samples under specific load…
Fourier Transform Infrared Spectroscopy (FTIR)
The test method is based on determining the absorption of infrared radiation by presenting the result as a spectrum. In Fourier spectrometers, the spectra…
Optical Microscopy (OM)
The optical (digital) microscope (OM) observation is to determine the microstructure of the material. There are no standards in microscopic observations.…
Scanning Electronic Microscopy (SEM)
The scanning electron microscope (SEM) observation is to determine the microstructure of the material and chemical analysis performed by EDS. The objective…
Dynamic stiffness modulus
The dynamic stiffness modulus measurement is to determine the relationship between maximum applied stress and maximum strain response performed by measuring…
Resistance to vertical load
The goal of the test is to determine the vertical load capacity and load deflection characteristics of brackets subjected to vertical load. Vertical load…
Strength of corners
The goal of the test is to determine the strength of corners of window/casement frame when it is subjected to compression bending test. The strength of corners…